| |
|
|
INTRIDUCTION: |
| |
| Becon
Brand submersible pump sets available in the range of
V-3,V-4,V-6 & Open well including miniopenwell(S.S.Body)for
Domestic purpose. Beside this we also offer good
quality
self priming and mono block pump sets.
Design of the Becon
submersible is prepared by the expert qualified
Engineers having wide experience in Submersible media
the accurate inspection and sharp accuracy make the
Becon India's No.1 Submersible PumpSet.
Each Becon
Submersible pump sets passed through many testing stages
it reaches to our values customer. |
|
|
TECHNICAL
SPECIFICATION
FOR SUBMERSIBLE |
| |
| PUMP |
| Name
of parts |
V-3"pump |
V-4"
pump |
V-6"pump |
| Imperller
|
Noryl
GEN |
Noryl
GEN |
Brass |
| Diffuser
|
Noryl
GEN |
Noryl
GEN |
SS/C.I. |
| Stage
casing |
Stainless
steel |
Stainless
steel |
Stainless
steel |
| Pump
Shell |
Stainless
steel |
Stainless
steel |
|
| Pump
Shaft |
SS-304 |
SS-304 |
SS-304 |
| suction
Breacket |
Brass/C.I. |
Brass/C.I. |
Brass/C.I. |
| Outlet |
Brass/C.I. |
Brass/C.I. |
Brass/C.I. |
| Middle
Stage |
|
Noeyl |
SS/C.I. |
| Middle
Bush |
|
Leaded
Bronze |
Leaded
Bronze |
| Stainer |
Stainless
steel |
Stainless
steel |
Stainless
steel |
| Bush |
Leaded
Bronze |
Leaded
Bronze |
Leaded
Bronze |
| Hadware |
SS-304 |
SS-304 |
SS-304 |
|
|
|
| MOTOR |
| |
| Name
of parts |
V-3"
Motor
(72mm) |
V-4"
Motor |
V-6"
Motor |
| Stemping |
CRNGO |
CRNGO |
CRNGO |
| Shaft |
S.S.-410 |
S.S.-410 |
EV-8 |
|
Thrust
Bearing |
Tefflon
SS-304 |
Tefflon
SS-304 |
Tefflon
SS-304 |
| Housing
|
Brass/C.I. |
Brass/C.I. |
C.I. |
| Bearing
Bush |
Leaded
Bronze |
Brass/C.I. |
C.I. |
| stator
Shell |
S.S. |
S.S. |
S.S. |
| End
Ring |
E.C. copper |
E.C. copper |
E.C. copper |
| Hadware |
SS-304 |
SS-304 |
SS-304 |
|
| RANGE: |
- V-3-0.5 H.P. To
1.25 H.P. Single Phase Only.
- V-4-0.5
H.P. To 3.0 H.P. Single Phase 1.0 H.P. To 5.0 H.P. Three
Phase .
- V-6-3.0 H.P.To
20.0 H.P. Single Phase Only.
|
| APPLICATION: |
-
Pumping water
from Bore of 72mm,100,150mmand above.
- Domestic water
supply to large residence multistoried, Housing complex, Bunglow.
- Public water
supply schemes in Urban and rural area.
- Industrial
water suppy.
- Irrgation
systems like drip, sprinkler.
- Garden, Nurseries, Hotel, etc.
|
| |
TECHNICAL
SPECIFICATION FOR OPENWELL |
|
Name of Parts |
Openwell
(C.I.Body) |
Mini Openwell
(S.S. Body) |
|
Motor Frame |
Cast Iron |
Stainless Steel |
|
Impeller |
Rigid C.I. |
Rigid C.I. |
|
Pump Volute |
C.I. |
C.I. |
|
Operating Volt. |
280 to 440 |
140 to 240 |
|
Bearing |
S.S. + Teflon |
S.S. + Telflon |
|
Winding Wire |
E.C. Grade |
E.C. Grade |
|
Shaft |
EN-8 |
EN-8 |
|
Sleeve |
S.S. |
S.S. |
|
| |
| RANGE: |
- 3.0 H.P. to 7.5 H.P. Three Phase Only
- 0.5 H.P. to 2.0 H.P. Single Phase
( Mini Openwell
Domestic Purpose)
- 1.0.H.P. to 2.0.H.P. Three Phase
( Mini Openwell
Domestic Purpose)
|
| APPLICATION: |
- Lifting water from Openwell for Irrigation
- Lifting water from River or canal
- Sprinkler and drip Irrigation
- Pumping water from sumps or Under ground water Tank
- Domestic water supply etc.
|
